Your Weapon Stats

OPS MARINE · Apr 9, 2010

imported post

I am curious to know how much you know about your weapon of choice. What materials are in its make? What finish? Here's mine.

Aaron1124 · Apr 9, 2010

imported post

Ruger P95

9mm

Code:

TheFreeman · Apr 9, 2010

imported post

Kimber Grand Raptor II

.45ACP 8 rds

Specifications: Height (inches) 90° to barrel: 5.25
Weight (ounces) with empty magazine: 38
Length (inches): 8.7
Magazine capacity: 8
Ambidextrous thumb safety
Recoil spring (pounds): 16.0
Full length guide rod
Frame: Material: Stainless steel
Finish: Highly polished stainless steel (flats)
Width (inches): 1.28
Slide: Material: Steel
Finish: Brush polished (flats)
Front serrations
Barrel: Length (inches): 5
Material: Steel, match grade
Stainless steel match grade bushing
Twist rate (left hand): 16
Sights: Meprolight Tritium bar-dot night sight, adjustable
Radius (inches): 6.8
Grips: Rosewood, scale pattern
Kimber logo
Trigger: Aluminum Match Grade
Factory setting (appx. pounds): 4.0 - 5.0

elixin77 · Apr 9, 2010

imported post

Taurus PT1911

length: 8 ½ in
width: 1 ½ in
height: 5.45 in
weight: 38 oz for B, BHW and DT, (32 oz for B3), (39.4 oz for B1), (33 oz for AL), (33.6 oz for ALR)
trigger pull: 3 - 5 lb
.45 ACP caliber
5 in 1:16 twist, 6 groove barrel
single action
semi-automatic
trigger actuated ‘California spec’ firing pin drop safety
8 round detachable steel single-column magazine
blued carbon steel or satin stainless steel finish

rodbender · Apr 9, 2010

imported post

Mine is big, black, and loud. That's all I know about it.

Broondog · Apr 9, 2010

imported post

my Glock is made out of recycled Tupperware and old dog food cans. i was surprised though to find that it is a 'fotay' vs a .22.

my Sig 229 is built to slightly higher standards since i believe recycled soup cans were used.

:lol:

t33j · Apr 10, 2010

imported post

Broondog wrote:

my Glock is made out of recycled Tupperware and old dog food cans. i was surprised though to find that it is a 'fotay' vs a .22.

my Sig 229 is built to slightly higher standards since i believe recycled soup cans were used.

:lol:

mmm mmm good

kwikrnu · Apr 10, 2010

imported post

puma bounty hunter pistol

Mine is .44 magnum that equals approximately 1350-1600 fps with various 165-240 grain bullets. Made in Italy from steel and wood.

Close second and third arethe ak pistol (high capacityand cheap ammo)and smith & wessons 500 revolver (just cool).

ChrisXD40 · Apr 10, 2010

imported post

This is my pistol. There are many others like it, but this one is mine. My pistol is my best friend. It is my life. I must master it as I must master my life. Without me, my pistol is useless. Without my pistol, I am useless. I must fire my pistol true. I must shoot straighter than my enemy, who is trying to kill me. I must shoot him before he shoots me. I will. Before God I swear this creed: my pistol and myself are defenders of my country,myself and my family, we are the masters of our enemy, we are the saviors of my life and the lives of my loved ones. So be it, until there is no enemy, but peace. Amen.

danbus · Apr 10, 2010

imported post

I think mine is broken. Top experts say that guns are dangerous and it kills people, but mine hasn't done so. If fact, it's had the exact opposite effect, bad guys seems to avoid my gun.

Maybe it's a defect?

kwikrnu · Apr 10, 2010

imported post

danbus wrote:

...bad guys seems to avoid my gun.

and cops are attracted to it...It's a magic gun.

deepdiver · Apr 10, 2010

imported post

OPS MARINE wrote:

I am curious to know how much you know about your weapon of choice. What materials are in its make? What finish? Here's mine.

How much do we know or how much can we look up online and post?

Primary carry pistols off the top of my head:

Springfield XD45 compact service
.45 ACP
4" barrel
Polymer Frame
Forged Steel slide & barrel, melonite finish
Stainless steel magazine body & spring w/polymer floor plate w/ 10 or 13 round mags

Sig Sauer P228 (West German Manufacture - 1995 production)
9mm
3.9" barrel
Aluminum alloy frame
Stamped carbon steel blued slide, steel barrel
Carbon steel magazine body & spring w/aluminum floor plate, 13 rd

Gunslinger · Apr 11, 2010

imported post

Primary carry, SIG C3 Commander slide/Officers frame 1911. Then Browning Hi-Power. C series bought new in 1971, NRA 99%. Third choice, SIG GSR (rail) full sized 1911. Both SIGs 100% made in Exeter, NH. Bersa Firestorm Mini-9 and M-85 .38spcl for in the pocket carry--both with +Ps. Taurus 24/7 OSS .45ACP with SIGLite light/laser on rail in the nightstand.

SpringerXDacp · Apr 11, 2010

imported post

Glock21SF

• Caliber .45ACP
• Length (slide) 7.59 in.
• Height 5.47 in.(139mm)
• Width 1.27 in.(32.5mm)
• Length between sights 6.77 in.
• Barrel length 4.6 in.(117mm)
• Length of twist 15.75 in.
• Magazine capacity 13
• Magazine weight 3.1 oz.
• Full magazine weight 12 oz.
• Trigger pull (standard) 5.5 lbs.
• Trigger travel for discharge 0.5 in

fozzy71 · Apr 11, 2010

imported post

FN Herstal FNP-9

- Caliber: 9mm
- Operation: DA/SA with Decocker
- Twist Rate: 1 in 10" RH”
- Barrel Length: 4”
- Overall Length: 7.4”
- Height: 5.4”
- Width: 1.55”
- Weight: 24.7 oz. empty
- Magazine: 16- or 10-round magazines
- Interchangeable arched and flat backstrap inserts

GLOCK21GB · Apr 11, 2010

imported post

Glock 34 9mm Tactical / practical

Manufacturing
Make: Glock
Country: Austria

Ballistics
Caliber: 9mm
Capacity: 10/17/19 rounds
Rifling: right, hexagonal, 25

Dimensions
Type: Specialized
Weight: 22.92 oz (650g)
Length: 8.00" (203mm)
Width: 1.18" (30mm)
Barrel: 5.32" (135mm)

Design
Frame/Finishes:
Black Polymer
Grips/Stock:
Integrate

Your Weapon Stats

OPS MARINE

Regular Member

Aaron1124

Regular Member

TheFreeman

Regular Member

elixin77

Regular Member

rodbender

Regular Member

Broondog

Regular Member

t33j

Regular Member

kwikrnu

Banned

ChrisXD40

New member

danbus

Regular Member

kwikrnu

Banned

deepdiver

Campaign Veteran

Gunslinger

Regular Member

SpringerXDacp

New member

fozzy71

Regular Member

GLOCK21GB

Campaign Veteran